Start with the one measurement that shapes everything
The Stay Puft Marshmallow Man Anger Face Costume Ver. 400% figure stands approximately 280mm tall. That single catalog specification is the foundation of every display decision: shelf clearance, viewing distance and where the figure sits relative to other collectibles. Treat 280mm as your minimum vertical space, then add a little breathing room above the head so the figure does not look crammed into a cubby.
Because the catalog lists only the 400% format and a Standard variant, there is no alternate size to plan around here. Your job is to find a spot that suits one 280mm figure rather than a set, which makes this an easier display project than a multi-figure lineup.
Catalog details that guide the setup
- BE@RBRICK STAY PUFT MARSHMALLOW MAN ANGER FACE COSTUME Ver. 400%: Figure stands approximately 280mm tall in the 400% size format. This is the number to measure against your shelf, cabinet or display case before you commit to a location.

BE@RBRICK STAY PUFT MARSHMALLOW MAN ANGER FACE COSTUME Ver. 400% - BE@RBRICK STAY PUFT MARSHMALLOW MAN ANGER FACE COSTUME Ver. 400%: Features a detailed anger face costume inspired by the Stay Puft Marshmallow Man. The costume detailing is the visual centerpiece, so display it where the face is visible rather than tucked behind other pieces.
- BE@RBRICK STAY PUFT MARSHMALLOW MAN ANGER FACE COSTUME Ver. 400%: Manufactured by MEDICOM TOY, a renowned creator of designer toys. Knowing the maker helps you search for any official care guidance if you want more than the catalog provides.
A display routine you can actually keep up
Displaying a 400% figure is mostly about preventing small problems before they become permanent ones. Work through these checks once when you set the figure up, then repeat the dust step on a schedule that matches how dusty your room gets.
- Measure the space before you move the figure: Confirm your shelf or case gives at least 280mm of vertical clearance for the figure itself, plus a little extra above the head. Check depth too, so the figure is not overhanging the front edge.
- Choose a spot away from direct sun and heat: A shelf or cabinet that stays out of direct sunlight and away from radiators, vents or other heat sources is the safer default for any painted collectible. The supplied catalog does not include specific lightfastness or temperature guidance, so treat this as sensible placement rather than a manufacturer instruction.
- Dust lightly and regularly: Use a soft, dry tool such as a clean makeup brush or a microfiber cloth to lift dust from the costume surface. Work gently around the anger face details rather than scrubbing. The catalog does not supply a cleaning procedure, so keep your approach minimal and avoid wet cleaners unless you have confirmed guidance from the maker.
- Handle by the body, not the costume details: When you lift the figure for dusting or repositioning, support the main body with both hands. Avoid pulling on protruding costume elements, which are the parts most likely to be stressed by careless handling.
- Recheck the spot after cleaning: After you set the figure back down, confirm it sits flat and stable and is not leaning against the back of the shelf or another object.
Display ideas that suit a 280mm figure
A 400% BE@RBRICK is large enough to anchor a shelf but small enough to share space. These setups keep the anger face costume readable without overcrowding it.
- Solo shelf with open space around it: Give the figure its own shelf with clear space on both sides. This is the simplest way to make the costume details the focus and to avoid knocks from neighboring items.
- Eye-level cabinet spot: Place the figure at or near eye level so the anger face is visible without crouching. A glass-front cabinet also reduces dust without hiding the figure.
- Paired with one contrasting piece: If you want company for it, choose a single figure with a clearly different silhouette or color so the two do not compete. Keep enough gap between them that neither can fall into the other.
- Away from high-traffic edges: Avoid the front edge of a desk or a shelf beside a doorway where sleeves and bags pass close by. A 280mm figure is stable on its own but easy to knock if it sits in a busy path.
What the catalog confirms and what it leaves open
The supplied product record is short, so it helps to separate what you can rely on from what you will need to decide for yourself.
- Confirmed: size and format: The figure is approximately 280mm tall and is described as the 400% size format. Use that as your display planning number.
- Confirmed: costume and maker: It features a detailed anger face costume inspired by the Stay Puft Marshmallow Man and is manufactured by MEDICOM TOY.
- Not confirmed: cleaning products: The supplied information does not include a cleaning procedure or approved products. Keep dusting dry and gentle, and look for official MEDICOM TOY guidance if you want more specific care instructions.
- Not confirmed: age and safety details: The supplied record does not list an age range, warnings or small-part information. If the figure will be within reach of children, check the packaging or the manufacturer's listing before treating it as a child-safe item.
When to move the figure somewhere safer
Revisit your display spot if you notice dust building up faster than you can keep up with, if the figure sits in direct sun for part of the day, or if it is within easy reach of pets or young children. Moving a 280mm collectible is quick, and a better location prevents most of the wear that display causes over time.
If you are still deciding whether this figure fits your collection, the size and costume details above are the main factors. The Stay Puft Anger Face 400% works best as a focused display piece rather than as one of many crowded items on a shelf.


